Tile roofing in Austin for homes built to carry it
Tile is the most beautiful roof in Austin and the least forgiving to get wrong. Clay and concrete tile handle our heat well, but they are heavy, and the underlayment beneath them ages out long before the tiles do. We install and repair tile roofs across Austin, and we check the structure first, because tile does not suit every home. Call for a free inspection.
Service overview
What Tile Roofing in austin actually involves
Tile earns its place on Austin's Mediterranean and Spanish-style customs, from the stucco homes of Great Hills to the canyon-rim houses of Northwest Hills. The air gap between tile and deck keeps heat off the roof, which is why tile performs so well in our summers. But the numbers matter: tile weighs roughly 600 to 1,100 pounds per square, and a frame not designed for that load needs a structural check before any tile goes on. A material change that affects the structure needs a permit in Austin, and we flag that during the inspection. The tiles themselves can last for decades; the underlayment beneath them typically needs replacement every 20 to 30 years, and that is the job most tile owners actually face.
! Common warning signs
Cracked and slipped tiles after hail
Hail cracks tile and knocks it out of place, and a single slipped tile opens a path for water. We walk the roof after every storm, because cracked tiles are easy to miss from the ground and the underlayment below is not meant to be the roof.
Underlayment failure beneath sound tiles
The most common tile roof leak is not a broken tile at all. The underlayment ages out after 20 to 30 years while the tiles still look fine, and water starts finding the deck. If your tile roof is over twenty years old and leaking, the underlayment is the first suspect.
Weight and structure on older homes
Tile is heavy, and not every Austin frame was built to carry it. We check the structure before recommending tile, and we will tell you plainly when a home needs shingle or metal instead. A roof that the house cannot carry is not a bargain at any price.
Scope of work
What is included in a tile roof install
A tile project starts with structure and underlayment, not with the tile itself. Below is what a full tile installation with us covers as standard.
-
01
Structural check and deck preparation
We confirm the frame can carry tile before ordering a single tile. If the structure needs an engineering check, we say so at the inspection, not after the pallets arrive. The deck is then repaired and prepared for the underlayment system.
-
02
Underlayment and battens
A full underlayment system goes down first, with battens to hold the tiles off the deck and keep the air gap that makes tile work in Austin heat. This layer is the real waterproofing; the tiles are the armour over it.
-
03
Tile setting and ridge detailing
Tiles are set to the manufacturer's pattern with proper headlap, and ridges are bedded and flashed. We match the existing profile on repairs, because a mismatched tile stands out from the street and sheds water differently.
-
04
Flashing, valleys and penetrations
Valleys are metal-flashed and every penetration gets proper flashing. On tile, flashing failures show up as leaks far from the actual gap, so we trace the water path rather than patching where the stain appears.
Why Austin homeowners choose tile
Tile suits Austin heat better than almost any other covering, and on the right home it is the longest-lived roof in the city. The key phrase is on the right home: weight and structure decide whether tile is an option at all. Call and we will check your home honestly before recommending it.
Call (469) 779-9940Tools and methods we use on tile roofs
Tile cutter and nibbler
Cuts tiles cleanly at hips, valleys and penetrations without cracking the glaze. A cracked cut edge is a future leak, so the cutting is done with care.
Roofing hammer and tile clips
Sets tiles and clips to the pattern the system requires. In Austin wind, a tile held only by gravity is a tile waiting to slip.
Chalk line and batten gauge
Keeps courses and battens true across the whole roof. Tile shows every crooked course from the street, and straight courses shed water the way the system was designed to.
Fall protection harness
Tile is fragile underfoot and slick when dusty. Every crew member on a tile roof wears a harness anchored to a proper point, and we walk the battens, not the tile noses.
Local execution
Tile belongs to a specific Austin: the Mediterranean-influenced customs of the limestone west side, where thin soils and slope drainage shape every roof, and the larger 1980s and 1990s homes of Great Hills and Northwest Hills. East of I-35, Houston Black clay moves with the seasons, and a heavy tile roof on a moving frame needs its structure checked with extra care. In Wildland-Urban Interface zones, tile's Class A rating is a genuine advantage, and wood shake is banned outright. The 2024 code family, effective 10 July 2025, governs new work. If your tile roof is leaking and the tiles look fine, read how to spot roof leak signs before they damage your attic and why your ceiling is staining, then call us. The underlayment is usually the story.
How tile roofing runs in Austin specifically
Recent work
Available 24/7 when a storm opens your roof
When it matters, we answer the phone
Tile roofs survive hail better than shingles but not undamaged: cracked tiles and slipped courses are the usual story after a storm. We prioritise active leaks first, and we carry tarps and common tile profiles on the truck where we can. We are open 24 hours, every day, so a leak at night still gets a voice on the phone, and we give you a straight answer on timing when you call.
How our tile roof installation works
Inspection and measurements
We walk the roof, check the structure and the underlayment age, and measure every plane. You get a written scope that says plainly whether the tiles, the underlayment, or both need work.
Tear-off and deck prep
Where tiles come off, we lift and stack the sound ones for reuse, strip the failed underlayment, and repair the deck. Sound tiles going back on is normal on a tile job, and we say so up front.
Underlayment and flashing
A new underlayment system goes down with battens, then the tiles are set back to pattern and the valleys and penetrations are flashed. This layer is the waterproofing, and it gets the same care as the visible tile.
What shapes the cost of tile roofing in Austin
We do not publish prices, because no two tile roofs price the same and a number quoted without seeing the roof would be a guess. Call (469) 779-9940 for a free inspection and we will check the structure, the underlayment age and the tile condition, then give you a written estimate. The factors below are what move that estimate.
Tile type and profile
Clay and concrete tile price differently, and matching an existing profile can cost more than a new-build profile. We show you the options against your home before you choose.
Underlayment scope
A re-tile with new underlayment is a different job from a tile-only repair. Many tile roofs need the underlayment, not the tiles, and we will tell you which one yours needs.
Structure and access
If the frame needs a structural check, or the roof is steep and multi-plane, the labour changes. We confirm the structure at the inspection so there are no surprises mid-job.
Rated by Austin homeowners
Tile roofing questions we hear every week
How do I get a price for tile roofing in Austin TX?
Call (469) 779-9940 for a free inspection. We check the structure, the underlayment age and the tile condition, then give you a written estimate. We do not quote a price over the phone for a roof we have not seen.
How long does a tile roof last in Austin?
The tiles themselves can last for decades in Austin heat, but the underlayment beneath them typically needs replacement every 20 to 30 years. That underlayment job is the one most tile owners actually face, and it is often done by lifting and reusing the sound tiles.
Can my house support a tile roof?
Not every home can. Tile weighs roughly 600 to 1,100 pounds per square, so the frame has to be designed for it. We check the structure during the inspection and will tell you plainly when shingle or metal is the right call instead.
Why is my tile roof leaking if the tiles look fine?
Because the leak is usually in the underlayment, not the tile. Underlayment ages out after 20 to 30 years while the tiles still look sound. We trace the water path from the attic side and the roof side before recommending any work.
Related services
Roof Replacement
When tile, underlayment or both are past repair, a full replacement is the next step. We handle the structure check, decking and new tile system in one project.
Roof Repair
A cracked or slipped tile is worth fixing early. We match the profile and re-seat tiles so the repair sheds water like the rest of the roof.
Roof Flashing Repair
Most tile leaks trace back to flashing at valleys and walls. We rebuild flashing properly rather than patching where the stain appears.
Shingle Roofing
If your home cannot carry tile, architectural shingles are the most common Austin roof, and we install and repair them across the city.
Get your tile roofing in Austin inspected this week
A tile roof hides its problems under sound-looking tiles. Call us for a free inspection with photos and a written scope. We answer the phone around the clock.