Clark & Sons Roofers LLC logo Clark & Sons Roofers LLC
Chimney Flashing Repair

Chimney flashing repair in Austin that stops leaks

A leak at the chimney is almost never the chimney. It is the flashing where the chimney meets the roof, and it is one of the most common leaks on Austin's older homes. We rebuild chimney flashing across Austin, step and counter flashing done properly, so the leak stops for good. Call for a free inspection.

Service overview

What chimney flashing repair austin TX actually involves

Chimney flashing is two parts working together: step flashing woven into the shingle courses up the sides of the chimney, and counter flashing set into the masonry that covers the top of the step flashing. When either part fails, water runs down the chimney and into the deck, and the stain shows up on the ceiling some distance from the chimney itself. Austin's older homes have brick chimneys on 1920s bungalows in Hyde Park, Clarksville and Bouldin Creek, and the mortar and flashing on those chimneys have had decades of heat, hail and rain. Sealant alone will not fix failed flashing: the flashing has to be rebuilt, and the deck beneath it checked for rot.

! Common warning signs

Stains on the ceiling near the chimney

A stain that grows after rain and sits near the chimney usually means the flashing has failed, not the roof field. We trace the water path from the attic side, because the entry point and the stain are rarely in the same place.

Cracked mortar and loose counter flashing

Counter flashing set into crumbling mortar pulls loose, and water runs behind it straight into the deck. We check the mortar joints and reset the counter flashing into sound masonry, not into dust.

Rotted decking under the chimney

A chimney leak that has run for seasons rots the decking beneath it. We check the deck from the attic side on every chimney flashing job, because new flashing over rotted deck is a repair that fails.

Scope of work

What our chimney flashing repair includes

A chimney flashing repair is a rebuild, not a reseal. Below is what a repair with us covers as standard.

  • 01

    Leak tracing and attic check

    We trace the water path from the attic side and the roof side, and check the deck beneath the chimney for rot. The stain shows where the water ended up, not where it got in.

  • 02

    Old flashing removal

    The shingles around the chimney are lifted and the failed step and counter flashing come out. The deck beneath is inspected and repaired before anything goes back.

  • 03

    Step flashing rebuild

    New step flashing is woven into the shingle courses up both sides of the chimney, with proper overlap so water sheds down the roof instead of into the deck.

  • 04

    Counter flashing and cricket

    Counter flashing is set into sound mortar joints to cover the step flashing, and a cricket is fitted behind wide chimneys to divert water around them. The cricket is what keeps water from ponding against the brick.

Why Austin homeowners rebuild chimney flashing

Sealant over failed flashing lasts a season; rebuilt flashing lasts for years. The chimney is the most common leak point on Austin's older brick homes, and the fix is a rebuild done properly. Call and we will trace your leak and show you the flashing.

Call (469) 779-9940

Tools and methods we use on chimney flashing

Masonry grinder

Cuts a clean reglet into sound mortar for the counter flashing. A clean cut is what holds the flashing; a ragged one lets water behind it.

Sheet metal brake

Forms step and counter flashing to the exact profile of your chimney and roof. Custom-formed flashing is what keeps the joint watertight.

Shingle ripper and pry bar

Lifts the shingles around the chimney without tearing the courses that stay. A clean lift is what lets the new step flashing weave in properly.

Moisture meter

Finds damp decking under a chimney that looks sound from above. Rotted deck under new flashing is a repair that fails.

Local execution

Chimney flashing leaks are an old-house Austin story. The brick chimneys of Hyde Park, Clarksville and Bouldin Creek have stood through decades of heat, hail and rain, and the flashing and mortar on those chimneys have aged with them. The 1920s bungalows of Bouldin Creek have the smallest, oldest, most valley-dense roofs in the 78704 area, and a leak there is usually a valley or flashing story, not a shingle story. East of I-35, Blackland clay moves the frame and works flashing joints loose; west of I-35, limestone slopes and oak canopy shade the roof and trap damp. If water stains appear near your chimney, read how to spot roof leak signs before they damage your attic and why your ceiling is staining, then call us for a free inspection.

Recent work

Chimney flashing on a Hyde Park bungalow On a chimney call we trace the leak from the attic, lift the shingles around the chimney, and rebuild the step and counter flashing. The deck beneath is checked for rot before anything goes back.
Crickets behind wide chimneys A wide chimney dams water behind it, and the ponding finds the flashing. We fit a cricket to divert water around the chimney, because flashing alone cannot hold back standing water.
Close-up of chimney flashing with brick chimney and step flashing
Response time
Response time

Chimney flashing repair when you need it

Active leaks get priority scheduling

After a major storm, chimney flashing is a common leak point: wind drives rain under loose counter flashing, and hail cracks the mortar it sits in. We prioritise active leaks first, and we carry flashing stock and sealant on the truck so we can stabilise a leak on the first visit. We are open 24 hours, every day, so a leak at the chimney still gets a voice on the phone, and we give you a straight answer on timing when you call.

24-48hr
Leak response window

How our chimney flashing repair process works

1

Roof and attic inspection

We trace the leak from the attic side and the roof side, check the deck beneath the chimney, and photograph the flashing. You get a written scope that says plainly what has failed.

2

Written scope and estimate

The estimate spells out the flashing rebuild, the deck repair and the shingle work, so you can see what you are paying for. We do not price a chimney we have not inspected.

3

Tear off the old flashing

The shingles around the chimney are lifted, the failed flashing comes out, and the deck is inspected and repaired. Then the new step and counter flashing go in, woven into the courses.

What shapes the cost of chimney flashing repair in Austin

We do not publish prices, because no two chimney repairs price the same and a number quoted without seeing the chimney would be a guess. Call (469) 779-9940 for a free inspection and we will trace the leak, check the deck and the mortar, then give you a written estimate. The factors below are what move that estimate.

01

Chimney size and roof pitch

A wide chimney needs a cricket, and a steep roof takes longer and needs more safety setup. Both change the labour.

02

Decking and mortar condition

Rotted decking under the chimney and crumbling mortar both add to the scope. We check both at the inspection so the estimate reflects the real job.

03

Shingle matching

Matching an older shingle profile around the chimney can mean special ordering. Standard architectural shingles are usually available quickly; discontinued profiles take longer to source.

Rated by Austin homeowners

Clark & Sons Roofers LLC is rated 4.9 out of 5 across 36 Google reviews. Call (469) 779-9940 to book a free inspection. — Google rating

Chimney flashing repair questions

How do I get a price for chimney flashing repair in Austin TX?

Call (469) 779-9940 for a free inspection. We trace the leak, check the deck and the mortar, then give you a written estimate. We do not quote a price over the phone for a chimney we have not seen.

Why does my chimney leak when it rains?

Because the flashing where the chimney meets the roof has failed, not the chimney itself. Step flashing woven into the shingles and counter flashing set into the mortar work together, and when either fails, water runs down the chimney into the deck.

Can chimney flashing be sealed instead of replaced?

Sealant over failed flashing lasts a season at best. When the flashing itself has failed, it has to be rebuilt, and the deck beneath it checked for rot. We say plainly which one your chimney needs.

What is a chimney cricket?

A cricket is a small peaked diverter fitted behind a wide chimney to send water around it instead of letting it pond against the brick. Without one, water stands against the flashing and finds a way in.

!

Get your chimney flashing in Austin fixed this week

A chimney leak rots the deck a little more with every storm. Call us for a free inspection with photos and a written scope. We answer the phone around the clock.

Call Now: (469) 779-9940